Consumer Chargers

Peak EFB and AGM technology for your START/STOP vehicle

Fast charging for your vehicle with engine Start/Stop features

The CT5 START/STOP battery charger and maintainer has been specially designed to charge and maintain batteries in Start/Stop vehicles and being a set and forget charger it makes it perfect for those that don't want to know how it works just that it does.

Start/Stop technology is great for the environment but it can put a considerable strain on your battery, especially if it’s in an older car. By keeping the battery fully charged, you can take full advantage of all the Start/Stop technology benefits, such as better fuel efficiency and lower CO2 emissions. If you only make short journeys, use the CT5 START/STOP once a month to keep your battery in peak condition. And if you’re going away on holiday, just connect the charger to the battery to make sure your car’s ready to go when you return.

• Fully optimized for cars with Start/Stop technology, e.g. AGM and EFB batteries
• No buttons to press – fully automatic charging
• Simple to use with an easy to understand display
• Reverse polarity protected

Technical information
Ambient temperature; -20˚C to +50˚C
Positioning; Portable
Warranty; 5 years
Input; 220–240VAC, 50–60Hz, 0.5A max
Output; 14.55V, 3.8A max
Back current drain*; Corresponding to less than 1.5Ah/month
Battery types; 12V:, WET, MF, Ca/Ca, AGM, EFB, GEL
Battery capacity; 14–130Ah
Insulation class; IP65 (splash and dust proof)
Model Number; 40-166

Set and Forget Charging with convenient countdown

The CT5 range of chargers resets the level of convenience in charging. Rather than telling you the stage you are at this model attacks from the other perspective of time. The progressive LED's tell you how long till the charging is finished. That's great if you need to get going after a flat battery. Or are needing to know when you can use the vehicle, or in a workshop, scenario need to know which vehicle will be ready to service first.

This Time to Go still has the patented CTEK 8 stage charging profile, convenient small size, IP rated housing, comfort plugs to utilise any of the charging accessories but none of the user manual reading to understand which modes do what, when will the battery be ready. How long will the charge take.

All these features with the 5 year warranty and CTEK's reputation and backing make this a perfect choice for those of us that take our car to a dealership for servicing. When you don't have time or don't care to understand charging. That's just fine, this charger will pretty much do it all for you. Connect it up, turn the mains power on and the charger will do the rest.

• Fully automatic
• For all types of Lead-Acid 12V batteries.
• Tests and restores battery capacity.
• Reverse polarity protected.

Technical information
Ambient temperature; -20˚C to +50˚C
Positioning; Portable
Warranty; 5 years
Input; 220–240VAC, 50–60Hz, 0.6A max
Output; 14.4V/14.7V/15.8V, 5.0A max
Back current drain*; Corresponding to less than 1.5Ah/month
Battery types 12V; WET, MF, Ca/Ca, AGM, GEL
Battery capacity; 20–160Ah
Insulation class; IP65 (splash and dust proof)
Model Number; 40-164

The only charger you’ll ever need for LiFePO4

Simple Lithium charging

The LITHIUM XS is an advanced microprocessor controlled charger and maintainer specially designed for Lithium-Ion Phosphate (LiFePO4) batteries.

The LITHIUM XS is specially designed for Lithium-Ion Phosphate (LiFePO4) batteries. With up to 5A of charge current available, it can charge LiFePO4 batteries from 5Ah to 60Ah and maintain up to 120Ah. It’s easy to use – just connect it and charging starts immediately. There’s no need to disconnect your battery and any low voltage protection electronics will be reset automatically. The LITHIUM XS is a ‘connect and forget’ charger with 8 charging steps, a testing sequence that tells you if the battery can take and retain the charge, a unique maximisation step to restore full capacity and patented maintenance charging for maximum performance, even after months of inactivity.

• Easy to use – just connect and forget
• Unique 8 step charging for maximum performance and extended life
• Safe spark free operation
• Exceptionally clean voltage and current delivery with no surges or spikes
• Checks battery condition at each stage

Technical information
Ambient temperature; -20˚C to +50˚C
Positioning; Portable
Warranty; 5 years
Input; 220–240VAC, 50–60Hz, 0.65A max
Output; 13.8V/14.4V, 5.0A max
Back current drain*; Corresponding to less than 1Ah/month
Battery types; 12V:, LiFePO₄
Battery capacity; 5–120Ah
Insulation class; IP65 (splash and dust proof)
Model Number; 56-990

Powerful professional charging for workshops

The ultimate charger

The MXS 10 gives you state of the art technology and is ideal for professional use in workshops for caravan, RV, boat and car batteries with remote temp. sensor and power supply mode.

The MXS 10 is a fully automatic 8-step charger that delivers 10A to all types of 12V batteries from 20-200Ah and is also suitable for maintenance charging up to 300Ah. It includes battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning sulphated and deeply discharged batteries, a winter program for charging in cold weather which is also the AGM option which maximises the performance life of most Stop/Start batteries. The MXS 10 also has a temperature sensor for optimised charging and it can even be used as a power supply source for 12V equipment.

• Fully automatic ‘connect and forget’ 8 step charging
• Charges batteries from 20-200Ah
• Temperature sensor, AGM and Recond programs
• Power supply for 12V equipment

Technical information
Ambient temperature; -20˚C to +50˚C
Positioning; Portable
Warranty; 2 years
Input; 220–240VAC, 50–60Hz, 1.4A max
Output; 14.4V/14.7V/15.8V/13.6V, 10A max
Start voltage; 2.0V
Back current drain*; Corresponding to less than 1Ah/month
Battery types; 12V:, WET, MF, Ca/Ca, AGM, GEL
Battery capacity; 20–300Ah
Insulation class; IP65 (splash and dust proof)
Model Number; 56-823

The ideal charger for everyday use

For times when the mechanic can work out the issue - other than the battery

The MXS 3.8 is an advanced battery charger and maintainer. It has selectable programs for use on different sized batteries from the small ride-on lawn mower or motorcycle or jetski then normal mode for larger batteries and charging on cold days, also known as AGM mode.

The MXS 3.8 microprocessor controlled 7 step battery charger and maintainer is suitable for batteries from 1.2Ah-85Ah. Features include battery diagnosis to establish whether your battery can receive and retain a charge and a ‘Snowflake’ program for charging on cold days or to charge AGM batteries like those used in Start/Stop vehicles. The MXS 3.8 uses CTEK’s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods. The MXS 3.8 is simple to use and you can follow the whole charging process on the clear, easy to read display.

• Fully automatic ‘click and connect’ 7 step charging
• Smaller battery, normal battery and cold weather programs
• Charges batteries up to 85A
• Reverse polarity protected

Technical information
Ambient temperature; -20˚C to +50˚C
Positioning; Portable
Warranty; 5 years
Input; 220–240VAC, 50–60Hz, 0.5A max
Output; 14.4V/14.7V, 3.8A max
Start voltage; 2.0V
Back current drain*; Corresponding to less than 1Ah/month
Battery types; 12V:, WET, MF, Ca/Ca, AGM, GEL
Battery capacity; 1.2–130Ah
Insulation class; IP65 (splash and dust proof)
Model Number; 56-988

Popularity, looks, performance and functionality

When one charger has it all what more can be said?

The MXS 5.0 is the most common battery charger within the CTEK range. It covers all batteries under 100Ah which is most of what the average user will need to charge. The charger has a 0.8A motorcycle mode for small batteries up to 32Ah, a normal charging voltage mode of 14.4V, an AGM mode at 14.7V and a Recond mode at 15.8V. Any two or more combinations can be selected by pressing the MODE button. You can use 0.8A at 14.7V with a Recond (stage 6) or 5A charging at 14.4V by selecting the Car mode only.

So with all the endless options for maintenance charging, fast charging of small batteries and storage charging of larger batteries, desulphation and equalisation this truely is a one stop charging 12V power house that punches well above it's weight.

• Fully automatic
• 8 step 12V charging
• AGM program
• Built-in automatic temperature compensation

Technical information
Ambient temperature; -20˚C to +50˚C
Positioning; Portable
Warranty; 5 years
Input; 220–240VAC, 50–60Hz, 0.6A max
Output; 14.4V/14.7V/15.8V, 5.0A max
Start voltage; 2.0V
Back current drain*; Corresponding to less than 1Ah/month
Battery types; 12V:, WET, MF, Ca/Ca, AGM, GEL
Battery capacity; 1.2–160Ah
Insulation class; IP65 (splash and dust proof)
Model Number; 56-987