Compact battery monitor, just 124 x 62mm x 23mm!

Based on the highly successful BM-1 marine battery monitor, the BM-1 Compact is specially designed for applications where space is at a premium.

Caravans, mobile homes, RV’s, small boats and renewable power installations can all benefit from the BM-1 Compact. It is able to monitor the performance of any 12 Volt

Compact battery monitor, just 124 x 62mm x 23mm!

Caravans, mobile homes, RV’s, small boats and renewable power installations can all benefit from the BM-2 Compact. It is able to monitor the performance of any 12 Volt lead acid battery system with a capacity up to 600 AmpHours. The BM-2 Compact is supplied with a precision 200 Amp shunt and prefabricated cables to

Where the rubber meets the road

With a CTEK Bumper, you can help protect your charger from falls.
The Bumper 60 is made from durable silicone rubber which gives your charger extra grip on slippery surfaces. Much like a cellphone protector, it's designed to take the harsh knocks so the charger housing remains unscratched and in top condition. The Bumper 60 fits

This accessory is the same as the M6 comfort eyelets that are supplied with the charger. But in this example, the eyelets are 10mm for larger marine battery terminals.

• Cable length 40cm
• Female comfort plug opposite end of eyelets

Extend the range of your CTEK charger

The CONNECT – Extension Cable is the convenient and secure solution if your CTEK charger needs to be further away from the battery or the vehicle. Simply connect the 2.5m cable to your charger’s accessory plug and attach the other end to the sockets on your accessories.

The CTEK Analyser is manufactured by Midtronics which are highly regarded as the worlds best algorithm for performing a conductance test on batteries to ascertain the health of a battery. The units are self-powered by the battery they are testing and show a calculated CCA rating which you check against the manufacturer's spec. If the value is 80% or lower of new then it is deemed end of life.

Wireless Monitoring

Battery alerts, syncronised monitoring of multiple batteries, hard to reach batteries not a problem. These are just a few of the features of a wireless battery voltage sensor that syncs to a Smart Device.

The CTEK Battery Sense app works with the CTEK Battery Sense monitor to tell you everything you need to know about your battery's status,

Easily added charging convenience

With the CTEK Indicator Eyelets you can see the state of charge by viewing the L.E.D. lights. With the comfort connector right in the end of the indicator you can easily connect your charger directly into the indicator to recharge the battery once you have removed the alligator clips.

When the L.E.D. is green the battery is

Easily added charging convenience

With the CTEK Indicator Eyelets you can see the state of charge by viewing the L.E.D. lights. With the comfort connector right in the end of the indicator you can easily connect your charger directly into the indicator to recharge the battery once you have removed the alligator clips.

There are two versions of the comfort

Peace of mind in a Panel

With 1.5 metres of cable, you can further extend access to the battery. The panel can be flush mounted allowing view of the L.E.D. indicators which indicate the batteries voltage. Above 12.65 (Green), between 12.65V and 12.41V (Orange) or below 12.4V being (Red).

With M8 eyelets you can easily connect onto marine batteries with

Peace of mind in a Panel

With 3.3 metres of cable, you can further extend access to the battery. The panel can be flush mounted allowing view of the L.E.D. indicators which indicate the batteries voltage. Above 12.65 (Green), between 12.65V and 12.41V (Orange) or below 12.4V being (Red).

With M8 eyelets you can easily connect onto marine batteries with

This input cable set allows you to charge up your CS Free from a DC 12V battery or to use the CS Free as a DC to DC charger.

Use a separate 12V service battery to power your CS FREE without being connected to a power outlet.